How To Connect Home Theater Speakers To Your TV

Table of Content

• Part 3. FAQs of Hooking up a DVD Player to TV
• TVs with a cable box, media streaming box, or satellite receiver
• Connect The Blu-ray Player Directly To The TV by HDMI
• How do I connect my 5.1 home theater system to my DVD player?
• How do you connect your television’s audio outputs to your home theater system?
• What cables are needed to get TV sound to play on home theater speakers?

If you have a cable device, satellite receiver, or streaming device you may be able to get a surround sound audio signal from those. To do so you’ll need to connect the digital or HDMI audio outputs to your receiver’s input as needed using an HDMI cable. Actually, composite cables (A/V cables) have ends that are red, white and yellow. Red and white are for the audio connections and yellow for the video connection. HDMI resembles a longer and thinner USB cord, and only one cord of HDMI can for both video and audio.

Don’t buy short ones as they will not reach the destination. The silver and copper are very good for the best electrical conductivity and are affordable too. There are numerous materials used for creating the RCA cables.

Part 3. FAQs of Hooking up a DVD Player to TV

One speaker goes on either side of the TV and they both point inwards. If you are looking at the speakers from your couch they'll be at a roughly 45-degree angle to you. Some systems are labeled with an “i.” such as 1080i.

Bluetooth is the simplest and easiest way to connect. Your smart TV is updated and all your devices should be Bluetooth supported. So you can easily connect your soundbar with your TV and DVD player. Some smart DVD players can trigger a message on your phone to let you use the USB connector to pass camera information and use your phone as the external drive to play the DVD disc on your phone. Moreover, you can rip DVD into the digital format and transfer the ripped movies on your phone for playback.

TVs with a cable box, media streaming box, or satellite receiver

Only aging systems will have to worry about RF or lower. Look for a receiver which will accommodate all of your inputs. This means that if you have a set of speakers, an Xbox, a Blu-Ray player, and your TV, you should allow for at least 4 HDMI input ports and at least one HDMI output port. Home theater receivers have various input options for connecting through analog, digital optical, coaxial, or HDMI inputs, making it specifically geared towards a home theater setup. For complete surround sound, you will have to do another optical or coaxial cable connection. A home theater receiver, which is also known as a surround-sound receiver or an audiovisual or video receiver, is made to be a central control hub for various audio and visual devices that are connected to it.

However, it is very important that both your TV and home theater receiver are compatible with an ARC cable. You can check this by looking at where the HDMI ports on these devices are. If there is ARC written next to the HDMI port then your device is ARC-compatible, but if not, then you will not be able to use this method. This type of connection can output the top quality of Dolby Atmos and Dolby true HD audio. Plugin the other end of each cable with the corresponding input ports of the AV receiver. Connect the optical cable to the output optical port of the Blu-ray player.

Connect The Blu-ray Player Directly To The TV by HDMI

Routing a media streamer through a home theater receiver en route to the TV provides the best combination of video and audio quality. If your DVD player has a clock, check that the clock is set correctly. If the clock doesn't set itself, refer to the user manual to manually change the time. But, unless this seems to drastically take away from the audio quality, then you can assume that it is the media that you are streaming that is to blame rather than how you have your devices set up. If you are sick and tired of having to ask your friend to quiet down so that you can hear what your favorite actor is saying in the movies you watch at home, then it is time to enhance your sound quality. Roku has also jumped on this bandwagon and will allow you to play sound wirelessly through their line of wireless speakers.

Now connect the HDMI cable to the output port of the Blu-ray player. AV receivers can be called a great audio and video management tool. Because it is one of the best options to enjoy HD quality of video and audio. Check the quality of each cable in the entire system once a month. Damage wires can affect the signal transmission and can also give shocks to living things.

How To Connect Home Theater Speakers To Your TV

Good HDMI or s-video cables shouldn't run you more than $15 to $20 depending on where you shop . Check the ports on the back of your TV for common inputs, such as HDMI, RCA, and S-Video. LG.com utilizes responsive design to provide a convenient experience that conforms to your devices screen size. In order to get the best possible experience from our website, please follow below instructions.

Many home theater units offer a Dolby Pro Logic II feature which emulates surround sound from analog 2 channel inputs and can use all 5.1 system speakers. It does a decent job but isn’t a substitute for the real thing. That’s because, with a few exceptions, televisions usually “downmix” the audio stream to a 2 channel stereo output from a multi-channel format. It may be possible in some cases (you can check your menu settings to see if there’s an option) using an optical or coax output. Connect your TV’s coaxial audio output to the receiver’s coaxial digital input.

Because life waits for no one, at LG USA we create consumer electronics, appliances and mobile devices that are designed to help you connect with those who matter most. If your TV and your audio device both support Audio Return Channel, you want to insert a high speed HDMI cable into the first HDMI port on the back of your LG TV. Upgrading your TV set into a home theater is not a difficult task. After reading this article you can easily connect your soundbar with your TV and DVD player. There are diverse interfaces on the back of DVD player corresponding to different connection methods. And you have to choose the appropriate cords depending on your TV.

And remember volume will now be adjusted by the remote for the external device or by a knob if there is one. Press Enter, scroll down to External Speaker, and press Enter. With this step you're also turning off your TV's internal speaker since you won't be using it. And the other end into an ARC HDMI port on your sound unit. Connect one end of the AUX-in audio out port of your TV. Top 4 Solutions to Play DVD on Xbox 360 When you wanna to enjoy DVD with Xbox 360, you can learn the 4 methods to help you.